<!-- The markdown twin of https://kleidos.dev/feed/, converted from that page at build time. The page is the original; these are the same words, with the markup taken off. -->
Canonical: https://kleidos.dev/feed/
Updated: 2026-11-16

News feed

# Kleidos news, in your feed reader

A feed is a list of a site's news that a reader app checks for you. Give the app the address below once, and each new entry reaches you there, with no account on this site and no need to come back and look.

Updated 16 November 2026

## Subscribe

Paste this address into the feed reader you use. Most apps call it adding a feed, or a subscription.

Feed address

`https://kleidos.dev/rss.xml`

This feed is in English. The Spanish version of this page gives the address of the same entries in Spanish.

## What the feed has published

The eight entries the feed carries, newest first. Each one is a milestone of the roadmap, published when it starts working or starts being built, and its title links to its row there.

### [The hardened build](https://kleidos.dev/roadmap/#status-hardened)

14 November 2026 Working

Secure Boot, flash encryption over the firmware and the vault, and encrypted settings, on the boards with 8 MB of flash or more (the classic ESP32 ones from chip revision 3.0). The key derived from your PIN or passphrase is mixed with a secret only the board's own chip holds. The build is tested and works.

### [The power figures, measured at the cell](https://kleidos.dev/roadmap/#status-power)

30 October 2026 Being built

I have built the measurement system and begun using it on the boards: the measurements page prints a sleep figure only for a board I have measured with it, and “not yet” for the rest. Each of the others needs the measurement system in its battery wire, and most need the case opened to fit it.

### [One firmware, nine boards](https://kleidos.dev/roadmap/#status-fleet)

21 October 2026 Working

Every board declares its own hardware (its screen, its power controller, its buttons or keyboard) to the same firmware, and the drawings in “The devices” are generated from measurements of those same boards.

### [The encrypted vault on the device](https://kleidos.dev/roadmap/#status-vault)

21 October 2026 Working

Entries are stored as encrypted, authenticated records, with separate keys for encryption, authentication and the unlock check, and the host test suite covers the round trip and the refusals.

### [Unlocking, on every kind of input](https://kleidos.dev/roadmap/#status-unlock)

21 October 2026 Working

The boards without a keyboard or touch screen take a PIN dialed on the timing arc, the boards with a keyboard take a passphrase, and the touch boards take either, chosen when the vault is set up.

### [Typing over Bluetooth](https://kleidos.dev/roadmap/#status-typing)

21 October 2026 Working

The device becomes a Bluetooth keyboard for the session it is told to start, types over a bonded and authenticated link, and shuts the radio down again when the session ends.

### [Firmware updates from the browser](https://kleidos.dev/roadmap/#status-updates)

21 October 2026 Working

On the boards with room for two app partitions, firmware is uploaded from the admin panel; an image built for another board, or an older version, is refused, and an update that boots but never confirms itself rolls back on its own.

### [The admin panel](https://kleidos.dev/roadmap/#status-panel)

21 October 2026 Being built

The panel is already where entries are added, imported from another manager and exported as an encrypted backup, and it is still changing.
